38

H-164 & H-490
Full fiberglass replica hood. Features molded edges on all sides to assure a perfect fit. Redesigned inner structure allows bolting to original hinges bolts included. This inner structure gives full rigidity but low weight. H490 is same as H164, except it has internal frame for the front latch.

H-105& H-590
Excellent for street or strip. Includes fully bonded inner structure for maximum strength. Molded in steel inserts provide secure mounting to hinges. If desired, 4 pins can be used for racing application. H590 is same as H105, except it has internal frame for the front latch.

H-402R/L
Fenders of high quality fiberglass reduce weight, resist dings and dents and will never rust or deteriorate from harsh weather or road conditions. Durability is the key factor when using fiberglass manufactured by Unlimited. All parts contain high strength fiberglass cloth.

H-502R/L
Made to withstand everyday street use, yet light enough for racing application, these fenders will bolt to original mounting places. Extra reinforcement is added along door edge. These 65 Chevelle fenders are produced from the finest quality molds in the industry. This assures you the least amount of preparation work.

H-403/H-503
This trunk lid is designed for pro-street cars and features minimal inner bracing for low weight. Designed to use pins or dzus fasteners. Smooth surface is easily sanded for paint preparation. All parts have full gel coat surface for a proper paint base. See H403H & H503H for hinge mount trunk lids.

H-505
Designed for race application, but can be used on the street. Includes molded in hinge mounts for hinge application if desired. Base of scoop is fully molded in. Snorkel top is separate and is included. Hood pins are recommended for the front attachment.

H-405
For clearing extra high carburetion or sealing of intake. This 5" snorkel hood can increase power and reduce weight. Original front chrome trim can be installed if desired. Snorkel base is built in as an integral part of the hood. Snorkel top is supplied along with it.

H-507
Extra clearance is provided for high rise carburetion, overall height including snorkel top is 7". Full inner structure is the same as H105 and H505 which includes a cross brace in front of the scoop to prevent the hood from sagging.

H-407
Same as H-405 but offers 2" more height to accommodate higher carburetion and air intake velocity stacks. This hood also features the full inner structure for rigidity and can bolt to hinges or you can use 4 hood pins if desired.

 UP22.com the web's giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items.

H-428 & H492
Cowl induction hood with 2-1/4" of extra clearance over stock flat hood. This hood also features molded edges on all sides to insure perfect fit without grinding or fitting. Cowl induction scoop is open in the back to allow cold air to enter engine compartment. Bottom side is open for carburetor clearance. Small steel inserts are molded in for bolting to hinges. Low tension springs are available to replace existing hinge springs. H492 is same as H428, except it has internal frame for the front latch.

H-164SC
This is an example of a 64 Chevelle hood with a SC200 scoop installed. We will precision-cut a hole in the hood and `glass' the scoop in from the bottom. The scoop to hood joint on the top is then re-glassed and completely finished and ready for your primer and paint.

H-528 & H-592
'65 Chevelle cowl induction hood with 2-1/4" of extra clearance over stock flat hood. Has molded edges on all sides to insure perfect fit. Cowl induction scoop is replica of Camaro Z28 and allows high pressure air from the base of the windshield to enter from the rear. This extra air will improve performance and mileage. Steel inserts are molded in for bolting to hinges. Racing style hood pins are recommended for front hold down. H592 is same as H528, except it has internal frame for the front latch.

1965 Chevelle (H585) 4-3/4" Cowl induction hood

(H585& H595) 4-3/4" Cowl induction hood

H-519R/L
Front brackets are made of high strength hand-laid fiberglass. They will easily bolt to original places using stock bolts. These bumper brackets are copies of original steel brackets, but are designed for use on fiberglass bumpers only. Fits 1964 also.

H-265
Front bumper for 1965 Chevelle. Made from high strength fiberglass mat and cloth. This bumper can be bolted to original mounting brackets or fiberglass replica brackets. This bumper can easily reduce the front end weight by approx. 40 lbs. Can be painted to match color of car or painted black.

 UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items.