269.95

        129.95

299.95

H-101
Standard flat hood is a replica of the original 68-69 Chevelle. Full hollow style inner structure allows easy mounting to original hinges. Molded edges insure a perfect fit.
Note: All 68 & 69 Chevelle hoods come with 3 bolt locations on each side in the rear for mounting to the hinges. When mounting, only use 2. These are produced in this manner so that they can used on either 68 or 69 Chevelles.

  
UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA.

H-828
Bolts to the stock hinges and has a 69 Camaro style cowl induction scoop. 2 -1/4" extra clearance over a standard flat hood. Cowl induction scoop allows air to enter the engine area for increased performance.
Underside has rigid inner structure similar to original OEM inner structure.
3 models to chose from:
Full pin on (race style) H828T
Semi bolt on (bolts to hinges, pin front) H828
Full bolt on (bolts to hinges and uses front latch) H891

H-885 & H-895
H-885-HI-RISE "Out -law" 4-3/4 hi cowl induction hood for 68-69 Chevelle and El Camino.  Inner structure for bolting to hinges.  
H-895 bolts to hinges in the rear but also uses front latch. Cowl scoop overhangs rear of hood by 3-1/4".

H-805
Snorkel air induction is built into this design. Offering 5" in overall height it features internal flange for using an air pan kit. Full inner structure insures light weight and high strength.

H-102
This hood (designed for 70-72 models), made of high quality lightweight fiberglass, is intended as a replacement for original stock flat hoods. This hood has a fully braced inner structure which is constructed of hand laid fiberglass.

H-807
Designed to offer extra clearance for hi-rise manifolds and carbs. Extra bracing is provided on all Unlimited hoods to eliminate sagging in the middle. Molded edges are standard for a good fit.

H-128
Made in the Super Sport design, this hood is constructed to increased air flow to the air filter and carburetor. This hood (as are all Chevelle hoods), has molded steel inserts, providing secure mounting to the hinges. Pins for the front are recommended.

H-855
This is a replica of the 68-69 Chevelle SS hood. It features rolled edges on all sides to insure a perfect fit. Original chrome louvers can be installed. A full inner structure eliminates sagging and allows this hood to be bolted to the original hinges.
Note: All 68 & 69 Chevelle hoods come with 3 bolt locations on each side in the rear for mounting to the hinges. When mounting, only use 2. These are produced in this manner so that they can used on either 68 or 69 Chevelles.

H-205
Made with a five inch snorkel arrangement, this hood is designed with extra clearance in mind. Overall height including snorkel top is 5 inches. Recommended for those with something extra under the hood.

H-802R/L
Made to withstand everyday street use, yet light enough for racing application. These fenders will easily bolt to the original mounting locations. Extra reinforcement is added along door edge.

H-206
Made to stand up to use on the street, these fenders will easily bolt to original mounting locations. Cannot be used on El Camino body style.
H-206F
Front View of 70 70-72 Chevelle fenders.

H-819 Right and Left
Fiberglass bumper brackets will securely hold a fiberglass bumper. These brackets attach to original locations.

H-818 A,B,C,D            "NEW ITEMS"
Light weight and strong, front bumper brackets for 1968 and 1969 Chevelle. Set of 4 fiberglass brackets.
Designed from original GM shape and mount to original locations.

UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA.

H-73

71-72 Chevelle rear bumper

H-72
Designed for the 71-72 model Chevelle or El Camino this bumper will bolt to your original brackets or to our fiberglass brackets.

H-810
This fiberglass replica bumper is designed to bolt to original brackets. Strength and durability make this bumper ideal.

H-70
Designed for the 70 model only, this front bumper has the square parking light holes cut out.

H-910
Made from high strength fiberglass mat and cloth. This bumper can bolt to original mounting brackets. (Will not fit 68.)

UP22.com the web's giant-giant site for quality fiberglass. Customers agree, fit, price, quality all come together at UP22.com. Please visit UP22.com frequently to see updates, specials and new items. Or visit our factory in Hesperia CA.